Compaq 5532 - Manual (Page 208)

Appendix A Paper Specifications
208
Paper Specifications
Labels
Type: Edge-perforated, fan-fold, 3 to 17
inches (7.62 to 43.18 cm) wide, 2 to
16 inches (5.08 to 40.64 cm) long.
Thickness: Single-part: 15 to 100 pound (6.80 to
45.36 kg) stock; Multi-part: 1- to 6-
part forms (maximum 12 lb [5.44 kg]
ply of upper plies)
Sheet Thickness: 0.025 inch (0.064 cm) maximum
Drive: Adjustable tractors (6-pin
engagement)
On Backing: One-part continuous perforated fanfold back form.
Labels must be placed at least 1/6 inch (0.42 cm) from
the fan-fold perforation. Backing adhesive must not be
squeezed out during printing.
Sheet Size: 3 to 17 inches (7.62 to 43.18 cm) wide, including the
two standard perforated tractor feed strips. A
maximum sheet length of 16 inches (40.64 cm)
between top and bottom perforations.
Thickness: Not to exceed 0.025 inch (0.064 cm) (including
backing sheet)