Ieee 1284 parallel (bidirectional) submenu, Prime signal, Tof action – Compaq 5532 User Manual
Page 120: Buffer size in k
Chapter 4
HOST INTERFACE
120
IEEE 1284 Parallel (Bidirectional) Submenu
The IEEE
®
1284 interface supports bidirectional communication.
Configuration of this interface is controlled from the host.
Prime Signal
•
Enable. The parallel port will perform a warm start (reboot) if the
host asserts the Prime Signal.
•
Disable. The parallel port will not perform a warm start (reboot) if
the host asserts the Prime Signal.
TOF Action
•
Reset. A form feed is performed before a warm start when the
prime signal is asserted from the host. This setting is used only if
the Prime Signal parameter is enabled.
•
Do Nothing. Nothing occurs before a warm start when the prime
signal is asserted from the host.
Buffer Size in K
This option configures the amount of memory allocated for the IEEE
1284 parallel port buffer. You can specify between 1 and 16 Kbytes, in
1-Kbyte increments.
IEEE 1284
(from
)
Prime Signal
TOF Action
Buffer Size in
K
Enable*
Disable
Reset*
Do Nothing
1*
(1-16)
* = Factory Default