VACUUBRAND MV 10C NT + EK - Manual (Page 44)

page 44 of 92
Vacuum hose (caoutchouc) 15 mm ID (sold by meter) .............................686003
Adapter for gas ballast connection ...........................................................636193
via small flange KF DN 16
Level sensor for catchpots ...........................................................................699908
(VACUUBRAND controller CVC 3000 or VNC 2 is required).
At the inlet:
Metal hose (stainless steel) KF DN 25 (1000mm) .....................................673337
PTFE hose KF DN 25 (1000mm)..................................................................686033
Adapter small flange KF DN 25 / hose nozzle DN 15 mm (PP) ...............662808
Adapter small flange KF DN 25 / 2x connection for PTFE tube
I.D. 3/8”, O.D. 5/16” (10 / 8 mm) (PP)
incl. centring ring (with FEP coated seal ring) ............................................667052
Vacuum valve VS 25C KF DN 25 (butterfly-type valve) ...............................665008
At the outlet:
Small flange KF DN 16 / G 1/2” ...................................................................672101
Silencer G 1/2” .............................................................................................642473
For additional accessories such as vacuum valves, small-flange components,
vacuum gauges or vacuum controllers refer to www.vacuubrand.com
VCL 01
VCL-B 10
VCL 02
VCL-B 11
The VACUU•LAN ® modules allow process-ori-
ented, flexible and cost effective connections
according to your requirements. One vacuum
pump can support several workstations. Con-
tact VACUUBRAND for details.
VACUU•LAN ® manual flow control module VCL 01 ..................................677106
VACUU•LAN ® shut off / manual flow control module VCL 02 677107
VACUU•LAN ® automatic control module VCL-B 10 ..................................677208
VACUU•LAN ® manual flow control/
automatic control module VCL-B 11 ..........................................................677209
On this page we offer only a small selection of VACUU•LAN ® options. Please contact VACUUBRAND for further
information. Listed modules are designed for surface-mounted installation. Different catalog numbers are used for
modules designed for flush-mounting with concealed tubing.
Attention: Dust-laden gases, deposits and condensed solvent vapor can restrict
air flow out the silencer. The resultant back pressure can lead to damage of pump
bearings, diaphragms, and valves. Under those conditions, a silencer must not be
used.