VACUUBRAND VHC Pro - Manual (Page 8)

page 8 of 27
Documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully
the validity of this document with respect to his product. 25/11/2013 // 999281
Prior to cleaning and/or decontamination separte BVC control / G and BVC
professional / G from mains.
Prior to restarting allow the device to dry completely.
A wiping and spray disinfection is possible by using a ethanol based surface disinfectant (e.g., Pursept
A, manufacturer: Merz GmbH & Co. KGaA, Frankfurt/Main, Germany).
Comply with use and safety instructions of the manufacturer!
+ For information about the compatibility with the materials, ask the manufacturer
of the disinfectant.
surface disinfectant on
ethanol basis
External decontamination
The applicability of the decontamination method and the selection of the appropriate
disinfectants have to be ensured by the user.
Prior to decontamination clean surfaces with a damp cloth if necessary. Use water or
a mild detergent as cleaning agent.
NOTICE
NOTICE