VACUUBRAND VHC Pro - Manual (Page 14)

page 14 of 27
Documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully
the validity of this document with respect to his product. 25/11/2013 // 999281
➨ Connect gas pressure bottle to the pump inlet.
+ Keep the valve of the gas pressure bottle closed.
➨ Remove hose at the pump inlet.
➨ Switch off the BVC.
➨ Position the BVC in a hood or install an exhaust pipe at the
outlet of the pump to ensure proper disposal of outgoing
gas.
The applicability of the decontamination method and the selection of the ap-
propriate gas (e. g., formaldehyde, ethylene oxide, ammonia, .....) have to be
ensured by the user.
Decontamination of the pump due to gassing
NOTICE