VACUUBRAND VHC Pro - Manual (Page 10)

page 10 of 27
Documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully
the validity of this document with respect to his product. 25/11/2013 // 999281
Over time, discoloration and material changes (e.g., resiliency, elasticity/tightness,
cracking) due to repeated steam sterilizations may occur.
The number of autoclaving cycles can be marked on the plas-
tic disc (Memory Disc) of the filter (max. 20 autoclaving cycles
according to the manufacturer instruction).
121°C
2 bar
absolute
max. 20 x
It is not possible to disassemble the VHC pro completely.
Prior to autoclaving turn cap (1) and remove (2).
1
2
NOTICE
NOTICE