USL DAX-602 - Manual (Page 12)

DAX-602/802 INSTRUCTION MANUAL Ultra Stereo Labs, Inc.
- 12 -
1. Input Power - 12VDC @ 1A
power supply
2. Digital Input -
AES/EBU balanced line input. Both USL
and DMA8 connector formats are supported.
3. Ethernet Port - For communication with the user interface. 4. Hearing Impaired / V
isually Impaired - Narration (HI/VI-N) Output - Balanced or unbalanced line
audio output. 5. Surround Delay Select Switch -
Allows the surround audio to be delayed.
6. Delay
Active LED - Indicates when the delay switch is actual delay setting.
7.
Analog Output - Sends balanced or unbalanced line audio outputs to the Cinema Processor
.
Note:
This connector does not
exist on the DAX-602
DAX-602/802 INSTRUCTION MANUAL Ultra Stereo Labs, Inc.
- 13 -
Setting the Surround Delay
The LS/RS channels may be delayed between 0 and 150ms in 10ms steps.
Calculate the surround delay by using the following formula:
D = L - (W/2) +20
Where
D = Delay in ms
L = Auditorium length in feet
W = Auditorium width in feet.
8VLQJDVPDOOÀDWEODGHGVFUHZGULYHUVHWWKH/656'(/$FORVHVWWRWKHFDOFXODWHGYDOXH
Differences between the DAX 802 and 602
7KH '$; LV WKH IXOO IHDWXUHG YHUVLRQ ZKLOH WKH SURYLGHV HFRQRP\ EXW
YHUVDWLOLW\
Channel assignment
s:
* In the DAX-602 Mono/Surround mode:
(established by internal jumpers and a setting in the software)
7KH&HQWHURXWSXWLVQRUPDOO\FRPSRVHGRIG%RIWKH&HQWHUG%RIWKH/HIW
and Right and -9dB of the SW but may be adjusted by the software.
7KH/HIW6XUURXQGRXWSXWLVQRUPDOO\FRPSRVHGRIG%RIWKH/HIWDQG5LJKW6XU-
rounds but may be adjusted by the software.
HI/VN outputs remain as is.