USL DAX-602 - Manual (Page 11)

DAX-602/802 INSTRUCTION MANUAL Ultra Stereo Labs, Inc.
- 14 -
Setting up the DAX-602 Mono/Surround mode:
1) Remove the four side screws that hold on the cover.
2) Place the two jumpers in the position shown in the picture below.
3) Replace the cover. (See page 18)
4) Adjust output levels Center: -6dB, Left/Right: -3dB, LS/RS: -6dB to prevent
output overload.
DAX-602/802 INSTRUCTION MANUAL Ultra Stereo Labs, Inc.
- 11 -
Power Indicator - Indicates when unit is powered on.
Signal Presence Indicators - indicates when signal exceeds -30dB
Power Indicator - Indicates when unit is powered on.