TruTrak Vizion 380-385 Operation Manual User Manual
Page 32
Vizion 380/385
32
Rev -‐ Initial
Once a target altitude is selected, it will be displayed in the top
right
of
the
autopilot
display.
This
is
shown
in
the
fourth
picture
of
Figure
6.4.4a.
When the autopilot is engaged, it will synchronize to the current
vertical
speed,
as
long
as
the
current
vertical
speed
is
above
500
fpm,
otherwise
it
will
synchronize
to
500
fpm.
The vertical speed and altitude can be adjusted at any time
during
a
transition
to
a
selected
altitude.
This
requires
simply
moving
the
cursor,
which
normally
resides
beneath
the
SEL
track,
to
the
value
to
be
edited.
To
move
the
cursor
Press
the
KNOB
and
the
cursor
will
move
to
SVS,
Press
the
KNOB
again
to
move
the
cursor
to
SEL
altitude.
Figure
6.4.3b
shows
moving
the
cursor
around
the
display.
If the SEL altitude is moved to the current altitude the autopilot
will enter ALT HOLD.
The SVS can be adjusted to ANY value during a transition, even
the opposite direction.