Triner Scale VP-70 Manual - Manual (Page 34)

Page 7-3
7.3.2.1 Simple Tare
1. Make sure the scale is on zero.
2. Place empty container on scale.
3. Press the TARE soft key.
4. The scale will zero itself and place the Tare icon in the special
message area of the screen.
5. The scale is ready for weighing or sampling.
7.3.2.2 Keyboard Tare (pre-tare)
1. Make sure the scale is on zero.
2. Press the TARE soft key while the scale is on zero and empty.
3. You will be prompted to enter the Tare weight of the Container. See
screen below:
Enter Tare Weight
In Pounds
Decimal .
Decimal
point
soft key
TARE ENTRY
Tare Weight
entry prompt
4. Key in the tare weight in pounds. Use the DECIMAL soft key to enter
a decimal point. Press enter to accept the entry. Press clear to erase
entry.
5. When the input is accepted, the scale is ready for weighing or
sampling.
7.3.2.3 Removing a Tare Weight
To clear a Tare Weight, remove the container and all items from the
scale. Press the TARE soft key. The scale will be reset and the “T” icon
will be removed from the display.
7.3.3 MODE – How to change the weighing units
Press the MODE soft key to change the weighing units from pounds to
pounds/ounces.
HOME SCREEN
In Lb/Oz
mode
Pcs 000 Uwt 0.0000
Unit Wt
Mode
Soft Keys
Weight Display
Pieces Display
Item Memory
Indicatior
Tare
Sample
Special Message Area
Unit Weight Display
Tare Icon
00 00.00 MEM