Triner Scale VP-70 Manual - Manual (Page 14)

Page 4-1
4.0 EXAMPLES OF OPERATION
Calculating postal rates with the VP-70 is fast and easy. Follow the examples below to
become familiar with the process of weighing and rating an item.
4.1
Sending a First Class Mail Letter with Certified and Return Receipt
1. Place item on scale platform (3.5 oz or less).
2. Press the 1
st CLASS soft key.
3. Press the LETTER soft key.
4. Press the CERT soft key. Certified is added and the selected arrow (
W ) appears next
to Cert.
5. Press the RET RCPT soft key. Return Receipt is added and the selected arrow ( W )
appears next to Ret Rcpt.
6. The postage rate is displayed on the right middle side of the screen.
4.2 Sending a First Class Mail Package with Delivery Confirmation and
Insurance
1. Place item on scale platform (13 oz or less).
2. Press the 1
st CLASS soft key.
3. Press the PACKAGE soft key.
4. Press the DEL CON soft key. Delivery Confirmation is added and the selected arrow
( W ) appears next to Del Con.
5. Press the INSURE soft key and the scale will prompt for the insurance value.
Always make sure the scale weight display reads zero before placing an item
on the platform. If the scale does not read zero press the ZERO SCALE key.
• To remove a single Special Service: Press the corresponding soft key.
• To remove all Special Services: Press the CLEAR key
• To return to the Home Screen: Press and Hold the CLEAR key until the scale double
beeps or remove the item from scale.
• If Return Receipt is selected before Certified the scale will display an “Invalid
Sequence” error. This is because Return Receipt is not valid without Certified.
• Likewise, if Certified is deselected before Return Receipt an “Invalid Sequence” error
will occur and both special services will be automatically deselected.