Cissell HF234 - Manual (Page 30)

6
E9 (motor protection)
The thermo-magnetic protection was activated 5 times.
When a malfunction occurs during a program, the central display will com-
municate the appropriate error message at the end of the cycle. When this
malfunction has been removed and a new program has been selected, this
error message also disappears.
When malfunctions E3,E6, E7, E9 or Eb are detected at the start of the
wash cycle, the program will not be started and the error message will re-
main on the display.
Mot 2 (rotation sensor)
The speed detection is not operating properly. The speed meter is probably
out of order or disconnected.
Remark
EA (tilt)
The tilt switch was activated 15 times during final spin and the final spin was
therefore skipped.
Eb (tilt switch)
The tilt switch is blocked.