Toa C-VD6 HH - Manual (Page 4)

7. SPECIFICATIONS
6. RACK MOUNTING
When mounting the unit in an equipment rack, use the optional mounting bracket set and remove the rubber feet installed
on the underside of the unit.
Rack mounting bracket *
Blank bracket *
Fiber washer (M5) *
5 x 12 rack mounting screw *
* Parts included with the MB-15B-BK mounting bracket set.
3 x 14 self-tapping screw *
• Rack-mounting two units
(using the optional MB-15B-J mounting bracket set)
Rack mounting bracket *
Fiber washer (M5) *
Tie-plate *
5 x12 rack mounting screw *
M3 x 6 oval head screw *
* Parts included with the MB-15B-J mounting bracket set.
3 x14 self-tapping screw *
C-VD6 HH, C-VD6 UK
230 V AC 50/ 60 Hz
4.5 W (5.4 VA)
2 inputs, 1.0 V(p-p), 75Ω, BNC
6 outputs, 1.0 V(p-p), 75Ω, BNC
1 IN – 6 OUT, or 2 IN – each of 3 OUT, switchable
-10°C to +50°C
Panel : Aluminum, black, 30% gloss
Case : Pre-coated steel plate, black, 30% gloss
210 (W) x 46 (H) x 296 (D) mm
2 kg Model No.
Power Source
Power Consumption
Video Input
Video Output
Distribution
Operating Temperature
Finish
Dimensions
Weight
* Product specifications and external design are subject to change without notice.
• Rack-mounting a single unit
(using the optional MB-15B-BK mounting bracket set)
• Optional products
Rack mounting bracket:
MB-15B-BK (for rack mounting one C-VD6 unit)
Rack mounting bracket: MB-15B-J (for rack mounting two C-VD6 units)
Notes
• Use the Alarm Input Unit in locations with ambient temperature of between +0°C and +40°C.
• Be sure to mount the Alarm Input Unit below the heat generating components, and mount the perforated panel between
the Alarm Input Unit and such a heat generating component as required.
• Avoid installing the Alarm Input Unit in locations exposed to vibration.
133-12-473-8C
URL: http://www.toa.jp/