Toa C-BC511W - Manual (Page 4)

Pipe : Stainless-steel pipe
Top cover : PC/ ABS resin, cool gray
Metal part : Surface treated steel plate, black, paint
150 (W) x 203 (H) x 203 (D) mm (5.9 (W) x 8.0 (H) x 8.0 (D) inch)
1.1 kg (2.4 lb)
C-CC514, C-CC564, C-CC574, N-CC2564
C-BC511C, C-BC511C-S
Finish
Dimensions
Weight
Applicable camera
Applicable cover
Note: The design and specifications are subject to change without notice for improvement.
• Accessories
Top cover ................................................... 4
Safety wire ................................................. 1
Pattern paper ............................................. 1
3
1
4
5
2
6
Wall
Wall Mounting Bracket
C-BC511W
Top cover
(accessory)
Combination
Camera
(optional)
C-CC514
C-CC564
C-CC574
Network
Combination Dome
Camera (optional)
N-CC2564
Footing
Base unit
Camera unit
Ceiling Mounting
Cover (optional)
C-BC511C
C-BC511C-S
Safety wire
(supplied with
the combination
camera)
81 (3.2)
40 (1.6)
70 (2.8)
46 (1.8)
Unit: mm (inch)
1. Mount the wall mounting bracket on a
wall.
• Mounting anchor bolt (female screw) : M4
• Cable entry hole : ø50 – 60 mm
(ø2.0 – 2.4 inch)
2. Attach the base unit equipped with
footings to the wall mounting bracket.
Note
To attach the base unit to the bracket,
use the camera mounting screws
supplied with the combination camera.
3. Connect the cables and attach the
camera unit to the base unit.
4. Align the camera installation cover's
positioning mark and that on the base
unit and insert the cover to the base unit.
5. Rotate the camera installation cover
clockwise until it locks into place.
6. Attach top covers to the camera side
and wall side as well.
Be sure to carefully read the installation
manual supplied with the camera.
[ Wall mounting bracket base
dimensional diagram ]
[ Main body mounting view ]
4. INSTALLATION
5. SPECIFICATIONS
133-05-396-4A