Toa C-BC511W - Manual (Page 3)

2. GENERAL DESCRIPTION
The wall mounting bracket is designed to be used exclusively for mounting TOA's Combination Camera (C-
CC514, C-CC564 and C-CC574) and/or Network Combination Dome Camera (N-CC2564) on a wall.
By using this bracket in conjunction with the C-BC511C or C-BC511C-S Ceiling Mounting Cover, cameras can
be installed on a wall.
3. HANDLING PRECAUTIONS
• Fix the camera to the bracket using the designated mounting screws and ensure that the camera does not
rattle.
• Mount the bracket to a heavy-duty ceiling surface (such as concrete ceiling).
• Bolts and nuts used to install the unit on a wall are not supplied with the unit. Be sure to prepare bolts and
nuts separately keeping the wall’s structure and material, gross weight, etc in mind.
• Do not install the unit in locations exposed to constant vibration. The unit is not designed for vehicle or ship
use. Do not install the unit in a vehicle or ship.
• To prevent the unit falls off, be sure to hang the safety wire first when installing the unit.
• The Combination Camera is solely designed for suspended installation. The dome of the mounting bracket
must be mounted facing down and perpendicular to a horizontal ceiling surface. Take special care not to
install the dome at a tilted angle.
• Do not give the unit a great shocks or vibration, as the unit may fall off and cause damage.