Toa C-BC511P - Manual (Page 4)

Pipe: Stainless-steel pipe
Top cover: PC/ ABS resin, cool gray
Metal part: Surface treated steel plate, black, paint
ø150 x 233 (H) mm (ø5.9 x 9.2 (H) inch)
1.2 kg (2.6 lb)
C-CC514, C-CC564, C-CC574, N-CC2564
C-BC511C, C-BC511C-S
Finish
Dimensions
Weight
Applicable camera
Applicable cover
Note: The design and specifications are subject to change without notice for improvement.
1
5
4
3
6
2
Safety wire
(accessory)
Ceiling
Ceiling Suspension
Bracket
C-BC511P
Top cover
(accessory)
Safety wire
(supplied with the
combination camera)
Footing
Base unit Combination
Camera (optional)
C-CC514
C-CC564
C-CC574
Network
Combination Dome
Camera (optional)
N-CC2564
Camera unit
Ceiling Mounting
Cover (optional)
C-BC511C
C-BC511C-S
81 (3.2)
40 (1.6)
70 (2.8)
46 (1.8)
Unit: mm
(inch)
1. Mount the suspension pipe to the
ceiling.
2. Attach the base unit equipped with
footings to the suspension pipe.
Note
Use the camera mounting screws
supplied with the combination camera
when attaching the base unit.
3. Connect cables and attach the camera
unit to the base unit.
4. Align the ceiling mounting cover's
positioning mark with that on the base
unit.
5. Rotate the ceiling mounting cover
clockwise until it locks into place.
6. Attach the top covers to camera side
and wall side as well.
Be sure to carefully read the installation
manual supplied with the camera.
[ Mounting dimensional
diagram ]
[ Main body mounting view ]
Ceiling panel
ø50 – 60 mm
(ø2.0 – 2.4 inch)
• Accessories
Top cover ................................................... 4
Safety wire ................................................. 1
Pattern paper ............................................. 1
4. INSTALLATION
[ Ceiling mounting hole
dimensional diagram ]
5. SPECIFICATIONS
133-05-395-3A