Toa C-BC511P - Manual (Page 3)

2. GENERAL DESCRIPTION
The suspension bracket is designed to be used for suspending the Combination Camera (C-CC514, C-CC564
and C-CC574) and/or Network Combination Dome Camera (N-CC2564) from the ceiling. Using this bracket in
conjunction with the C-BC511C or C-BC511C-S Ceiling Mounting Cover also permits the camera to be
suspended from the ceiling.
3. HANDLING PRECAUTIONS
• Fix the camera to the bracket using the designated mounting screws, and ensure that they are securely
mounted without any play.
• Do not install the unit in locations exposed to constant vibration. Since the unit is not designed for vehicle or
ship use, do not install it in a vehicle or ship.
• To prevent the unit falls off, be sure to hang the safety wire first when installing the unit.
• The Combination Camera is solely designed for suspended installation. The dome of the mounting bracket
must be mounted facing down and perpendicular to a horizontal ceiling surface. Take special care not to
install the dome at a tilted angle.
• Do not give the unit a great shocks or vibration, as the unit may fall off and cause damage.