Warning, Installation – Toa C-BC200K User Manual
Page 3
C-CH100 and C-CH200 Series
Outdoor Camera Housings
C-BC200H Housing
Fixing Stand
Housing fixing stand
mounting bolt*
2
M6 x 12 hexagonal head bolt
with washer: 2 pieces
Camera housing mounting bolt*
1
[C-CH200 Series]
M6 x 12 hexagonal head bolt with washer: 2 pieces
[C-CH100 Series]
M6 x 12 hexagonal head bolt: 2 pieces
M6 spring washer: 2 pieces
M6 plain washer: 2 pieces
C-BC200K Wall Mounting Bracket
C-PH200 Outdoor
Pan/tilt Head
Camera housing mounting bolt*
1
[C-CH200 Series]
M6 x 12 hexagonal head bolt with
washer: 4 pieces
[C-CH100 Series]
M6 x 12 hexagonal head bolt:
2 pieces
M6 spring washer: 2 pieces
M6 plain washer: 2 pieces
Pan/tilt head mounting bolt
(accessory)
M8 x 25 hexagonal head bolt:
4 pieces
M8 spring washer: 4 pieces
M8 plain washer: 4 pieces
M8, M10 or W3/8 anchor bolt
Note: Mounting bolts are not supplied.
Prepare them separately.
*
1
Supplied with the C-CH100 or C-CH200 Series Outdoor Camera Housings.
*
2
Supplied with the C-BC200H Housing Fixing Stand.
INSTALLATION
Mount the C-BC200K Wall Mounting Bracket firmly to a wall using
M8, M10 or W3/8 anchor bolts. If there is any loose joint, the unit may
fall, possibly resulting in personal injury.
WARNING