Toa C-BC200K - Manual (Page 2)

Indicates a potentially hazardous situation which could result in death
or serious personal injury if ignored or mishandled.
WARNING
Indicates a potentially hazardous situation which could result in
moderate or minor personal injury, and/or property damage if ignored
or mishandled.
CAUTION
When Installing the Wall Mounting Bracket
• Install the unit only with the specified method. Failure to follow this instruction may cause extreme force to
be applied to the unit and the unit to fall, resulting in personal injury.
• Use nuts and bolts that are appropriate for the ceiling’s or wall’s structure and composition. Failure to do so
may cause the unit to fall, resulting in personal injury.
• Tighten each nut and bolt securely. Ensure that there are no loose joints after installation to prevent
accidents that could result in personal injury.
• Use the specified type of pan/tilt head and housing fixing stand. If the unit is installed in combination with
equipment not specified, the unit may fall, possibly resulting in personal injury.
• Avoid installing the unit in locations exposed to sea breeze or corrosive gas. The unit’s mount may be
subject to corrosion, which could cause the unit to fall, possibly resulting in personal injury.
When Using the Wall Mounting Bracket
• Do not place heavy objects on the unit as this may cause the unit to topple over or fall down and personal
injury could result.
• Do not stand or sit on, nor hang down from the unit as this may cause the unit to topple over or fall down,
possibly resulting in personal injury.
• Have the unit periodically checked by the dealer from where it was purchased. Should the mounting bracket
corrode or structurally deteriorate, the mounted unit could fall down, possibly resulting in personal injury.
GENERAL DESCRIPTION
TOA's C-BC200K Mounting Bracket is designed specifically for use in the wall-mounting of camera systems
comprising the outdoor camera housing in combination with either the Pan/Tilt Head or the Housing Fixing
Stand. The C-BC200K is constructed of stainless steel plate and is designed to withstand use in severe
outdoor environments without corrosion or marring of the unit's appearance.