Toa RM-1100 - Manual (Page 3)

3
When Installing the Unit
• Avoid installing the unit in humid or dusty locations, in locations exposed to the direct sunlight, near the
heaters, or in locations generating sooty smoke or steam as doing otherwise may result in fire.
When the Unit is in Use
• Do not place heavy objects on the unit as this may cause it to fall or break which may result in personal
injury and/or property damage. In addition, the object itself may fall off and cause injury and/or damage.
• Cut off the power supply (24 VDC) to the unit for safety purposes when cleaning or leaving the unit unused
for 10 days or more. A fire may result.
2. INSTALLATION PRECAUTION
Use the unit only with the voltage specified on the junction panel to which the unit is connected. Using a
voltage higher than that which is specified may result in equipment failure.
3. GENERAL DESCRIPTION
A remote control unit for general-purpose broadcast, the RM-1100 can make broadcast to up to ten zones and
simultaneously to the entire area. When using multiple RM-1100 units, priority order (First-in-first-out priority or
Individual unit priority) can be set among them.
4. FEATURES
• Uni-directional microphone suited to announcements.
• AUX input jack permits broadcast from the cassette deck or CD player.
• Internal compressor circuit prevents sound distortion caused by significantly large input during an
announcement from the microphone.
• Connection cables can be routed from the rear or either side of the unit, facilitating installation in any place.
Indicates a potentially hazardous situation which, if mishandled, could
result in moderate or minor personal injury, and/or property damage.
CAUTION