beautypg.com

Toa SR-SA4 User Manual

Stand adapter sr-sa4, Warning, Caution

background image

4. SPECIFICATIONS

1

Steel plate, white, paint
165 (w) x 175 (h) x 220 (d) mm
1.7 kg (including accessories)
ST-32

Hexagon head bolt M5 x 20 with washer ...... 8

Number of Speakers
to be Mounted
Finish
Dimensions
Weight
Applicable Stand
(option)
Accessories

Note: The design and specifications are subject to change without

notice for improvement.

For step 3 and 4 below, refer to the instruction manual attached
to the ST-32.

Step 1. Remove the screws on both sides of the speaker.

Note: The removed screws are not used.

Step 2. Install the SR-SA4 Stand Adapter to the speaker.

Step 3. Attach the bracket (included in the ST-32) to the

SR-SA4 Stand Adapter.

Step 4. Mount the bracket onto the stand.

3. SPEAKER MOUNTING

Speaker

Hexagon head bolt M5 x 20
with washer (included in the SR-SA4)

SR-SA4 Stand adapter

Screw
(4 each on
both sides)

Bracket (included in the optional ST-32)

ST-32 Speaker Stand (optional)

4

1

2

3

Fixing bolt

Fixing bolt

When installing
the SR-S4L speaker

When installing
the SR-S4S speaker

Speaker mounting screw
(included in the ST-32)

Plain washer (included in the ST-32)

Note
When using the ST-32, set the
inner pipe to its lowest position.

INSTALLATION MANUAL

STAND ADAPTER

SR-SA4

The SR-SA4 is designed to be used exclusively to mount the
SR-S4L or SR-S4S Line Array speaker on the ST-32 Speaker
Stand.

1. SAFETY PRECAUTIONS

Before installation or use, be sure to carefully read all the
instructions in this section for correct and safe operation.

Be sure to follow all the precautionary instructions in this
section, which contain important warnings and/or cautions
regarding safety.

After reading, keep this manual handy for future reference.

Do not use other methods than specified to mount the unit.
Extreme force is applied to the unit and the speaker could
fall off, possibly resulting in personal injuries.

Tighten each nut and bolt securely. Ensure that the unit has
no loose joints after installation to prevent accidents that
could result in personal injury.

Use the ST-32 Speaker Stand in combination. Doing
otherwise may cause the unit or component to fall off,
resulting in personal injury.

Indicates a potentially hazardous situation which, if
mishandled, could result in death or serious personal injury.

WARNING

Avoid touching the unit's sharp metal edge to prevent injury.

Indicates a potentially hazardous situation which, if mishandled,
could result in moderate or minor personal injury, and/or property
damage.

CAUTION

Printed in Japan
1 3 3 - 0 1 - 4 4 3 - 3 0

SR-S4L

SR-S4S

2. SPEAKER MOUNTING VIEW