Toa HY-0871WS - Manual (Page 2)

Printed in Japan
133-05-319-30
• Installation
Hexagon bolt W3/8" x 45
Hexagon bolt M8
(with spring washer
and plain washer)
Spring washer (W3/8")
Square nut
(W3/8")
Plain washer (W3/8")
Bracket
Supporting point
Arm A
(Select either Arm A or B
depending on the desired
speaker mounting angle.)
Base
Horizontal angle adjustment slot
ES-0871
Horizontal angle
adjustment slot
• Adjustable Mounting Angle Range
[Vertical (downward-facing) angle]
Use Arm A or B to set vertical mounting angle. The following table shows the adjustable mounting angle range of each
adjustment slot of (a) to (e). Select either Arm A or B depending on the desired speaker mounting angle.
Arm A
Supporting point
Arm B
Supporting point
(a) (b)
(c) (e)
(a)
(b)
(c)
(d)
(e)
(d)
Adjustable vertical (downward-facing)
angle range
0 °
3.7 ° – 7.3°
0 °
11 ° – 14.6°
18.3 ° – 22°
Adjustment slot
[Horizontal (leftward/rightward) angle]
To change the horizontal angle, use the horizontal angle adjustment slot in the base and bracket. (Refer to the section
"Installation".) Leftward and rightward angles are both adjustable in the range of 15°.
SPECIFICATIONS
Finish Rolled steel plate, paint, black, semi-mat
Weight 4 kg
Note : The design and specifications are subject to change without notice for improvement.