Casio EX-Z57 - Manual (Page 102)

102
OTHER RECORDING FUNCTIONS
IMPORTANT!
• Under certain conditions, a high shutter speed in
combination with a high ISO sensitivity setting can
cause digital noise (graininess), which makes an
image appear rough. For clean, good-quality images,
use the lowest ISO sensitivity setting possible.
• Using a high ISO sensitivity setting along with the
flash to shoot a nearby subject may result in
improper illumination of the subject.
NOTE
• You can use the key customization feature (page
106) to configure the camera so the ISO sensitivity
setting changes whenever you press [
̇] and [̈]
while in a REC mode.
Specifying Outline Sharpness
Use the following procedure to control the sharpness of
image outlines.
1. In a REC mode, press [MENU].
2. Select the “REC” tab, select “Sharpness”, and
then press [
̈].
3. Use [
̆] and [̄] to select the setting you
want, and then press [SET].
To get this:
High sharpness
Normal sharpness
Low sharpness
Select this setting:
+2
+1
0
–1
–2