Toa HS-1500WT - Manual (Page 8)

533-06-176-1C
URL: http://www.toa.jp/
10. SPECIFICATIONS
Note: The design and specifications are subject to change without notice for improvement.
• Accessories
Handle ................................................................................................ 1
Handle fitting bracket .......................................................................... 2
Rubber foot ......................................................................................... 2
Screw M6 x 20 (Used for attaching a handle and rubber foot.) .......... 4
• Optional products
Mounting bracket (For vertical speaker mounting):
HY-1200VB, HY-1200VW, HY-1500VB, HY-1500VW
Mounting bracket (For horizontal speaker mounting): HY-1200HB, HY-1200HW, HY-1500HB, HY-1500HW
Ceiling mount bracket: HY-C0801, HY-C0801W
Wall mount bracket:
HY-W0801, HY-W0801W
Speaker stand: ST-33B
Traceability Information for Europe (EMC directive 2004/108/EC)
Manufacturer:
TOA Corporation
7-2-1, Minatojima Nakamachi, Chuo-ku, Kobe, Hyogo,
Japan
Authorized representative:
TOA Electronics Europe GmbH
Suederstrasse 282, 20537 Hamburg,
Germany
Model No. HS-1200BT HS-1200WT HS-1500BT HS-1500WT
Enclosure Sealed type
Rated Input 60 W (High Impedance)
Power Handling Capacity Continuous pink noise: 100 W (Low Impedance)
Continuous program: 300 W (Low Impedance)
Rated impedance 8 Ω
100 V line: 170 Ω (60 W), 330 Ω (30 W), 670 Ω (15 W)
70 V line: 83 Ω (60 W), 170 Ω (30 W), 330 Ω (15 W), 670 Ω (7.5 W)
Sensitivity 97 dB (1 W, 1m) 98 dB (1 W, 1m)
Frequency Response 70 to 20,000 Hz 60 to 20,000 Hz
Crossover Frequency 3 kHz
Directivity Angle Horizontal: 90°, Vertical: 40°
Speaker Component Low frequency Low frequency
30 cm (12") cone type 38 cm (15") cone type
High frequency High frequency
Balanced dome tweeter x 6 balanced dome tweeter x 6
Input Terminal NEUTRIK NL4MP Speakon and M4 screw terminal (Barrier spacing: 9 mm)
Enclosure Polypropylene, Polypropylene, Polypropylene, Polypropylene,
Finish
black white black white
Punched net Surface-treated Surface-treated Surface-treated Surface-treated
steel plate, black steel plate, white steel plate, black steel plate, white
Operating Temperature –10°C to +50°C (14°F to 122°F)
Dimensions 361 (w) x 448 (h) x 320 (d) mm 451 (w) x 560 (h) x 400 (d) mm
(14.21" x 17.64" x 12.6") (17.76" x 22.05" x 15.75")
Weight 10 kg (22.05 lb) 14 kg (30.86 lb)