Input connectors, General description, Features – Toa FB-120W User Manual
Page 2: Dimensional diagram
5. INPUT CONNECTORS
• The NEUTRIK Speakon connectors are internally connected in parallel to the screw terminals; you can use either one.
• The right table shows the pin arrangement of the Speakon NL4MP connector.
• The usable connector (on the cable end) for the Speakon NL4MP IS Speakon NL4FC.
• Wiring diagram of the input connectors is shown at right.
Pin No.
FB-120B, FB-120W
1 +
Speaker +
1 –
Speaker –
2 +
–
2 –
–
Screw terminal 2P
Speakon NL4MP x 2
1 +
2 +
1 –
2 –
1 +
2 +
1 –
2 –
Speaker +
Speaker –
+
–
2. GENERAL DESCRIPTION
TOA's FB-120B/W is a compact, indoor-use subwoofer system employing a high-power 30 cm (12") woofer.
It is designed for use in conjunction with TOA's HX-5 series or other full range speakers, and is particularly ideal for
reproducing dynamic low-frequency sound for both permanent and temporary installations.
3. FEATURES
• Equipped with a convenient carrying handle.
• Suspended by wire or chain.
4. DIMENSIONAL DIAGRAM
* When suspending the speaker, remove the 4 screws on
both sides and install eyebolts instead.
(refer to "6.2. Suspended Installation.")
[Front]
[Side]
[Rear]
408 (16
1/16
)
310 (12
13/64
)
4-M8*
450 (17
23/32
)
70 (2
3/4
)
70 (2
3/4
)
408 (16
1/16
)
Unit: mm (inches)
Input connectors