beautypg.com

Wpim cable specifications, Wpim-t1, Appendix a – Cabletron Systems CSX200 User Manual

Page 57

background image

CSX200 Installation Guide

A-1

A

WPIM Cable Specifications

WPIM-T1

This section provides the Cabletron Systems part number and connector specifications for
WPIM-T1 interface cables.

Table A-1

provides connector type and part number information.

Table A-2

provides RJ48 connector pin assignments.

NOTE

For all WPIM cables, there is part number information for ordering a standard 20-foot
cable or a specified length of cable. The number 20 followed by the part number
denotes the standard 20-foot cable. The letter “L” denotes the specified length required
in feet or meters. For example: 9372095-3 denotes a 3 foot cable; 9372095-3M
denotes a 3-meter cable.

Table A-1

T-1 Interface Cable Part Numbers

Connector Type

Part Number

RJ48C

9372094

Table A-2

T-1 Connector Pin Assignments

Pin

Signal

1

Receive Ring

2

Receive Tip

3

Not Used

4

Transmit Ring

5

Transmit Tip

6

Not Used

7

Shield Ground

8

Shield Ground