Cabletron Systems CSX200 - Manual (Page 41)

Rackmount Installation
CSX200 Installation Guide 4-7
Figure 4-4 Tabletop or Shelf Installation
Rackmount Installation
Cabletron Systems offers an accessory kit that includes rackmount brackets, mounting screws, and
a strain-relief bracket for cable management. The accessory kit is not included with the CSX200,
but can be purchased separately from Cabletron Systems as part number CSX200-ACCY-KIT.
Rack mounting the CSX200 requires the following steps:
• Attaching the strain-relief bracket
• Attaching the rackmount brackets
• Installing the CSX200 in a 19-inch rack
• Connecting the CSX200 to a power source
Tools Required
• Phillips screwdriver
WARNING
Before installing the CSX200 into a rack, ensure that the rack supports the device(s)
without compromising the stability of the rack. Otherwise, personal injury and/or
equipment damage may result.
21 IN.
6 IN.
18 IN.
7 FT.
2012_07