Mounting in a rack, Connection, Connection example – Toa DP-SP3 User Manual
Page 20: Caution, Connection example 13.2. mounting in a rack
20
DP-SP3
To LAN
To the output terminals of
contact output devices
M-864D
Power amplifier
Spearker
Subwoofer
Spearker
Subwoofer
14. CONNECTION
14.1. Connection Example
13.2. Mounting in a Rack
(When rack mounting screws are supplied)
The supplied rack-mounting screws can be used for
the TOA equipment rack only. Do not use them for
other racks.
When installing the unit in a rack other than that of
TOA, be sure to use the screws with a diameter of
over 5 mm (0.2”) and length of over 12 mm (0.47”) to
mount the unit.
Failure to do so may cause the unit to fall, resulting in
personal injury.
(When rack mounting screws are not supplied)
Rack mounting screws are not supplied with the unit.
Be sure to use the screws with a diameter of over 5
mm (0.2”) and length of over 12 mm (0.47”) to mount
the unit.
Failure to do so may cause the unit to fall, resulting in
personal injury.
CAUTION
DIGIT
AL S
PEAK
ER P
ROC
ESSO
R DP
-SP3
PRESET
STAT
US
1
RUN
LINK
4
3
2
INPU
TS
PEAK
+12
1
2
0
– 40
OUT
PUT
S
PEAK
POWER
ON
OFF
+12
0
1
2
3
4
5
6
MUTE
– 40