Toa DP-SP3 - Manual (Page 13)

13
Flashes
Mute All is activated using the Software.
Intermittently flashing
Outputs 1 and 2 are being muted by the DP-SP3.
Returns to the original display status.
Flashing
Mute All is cancelled using the Software
Flashing
Mute is canceled
by the Software.
Flashing
or
Lights
8.2. Turning on the Mute Function by the DP-SP3
Step 1. Confirm that the “−40” level indicator of the output channel to be
muted remains unlit.
Note
When an output channel’s indicator lights or intermittently
flashes, this indicates that the output channel is being muted by
the DP-SP3 PC Software.
Step 2. Press the Mute switch of the corresponding channel, then release it when the “−40” output level
indicator of that channel begins to flash.
[Indicator status when the Mute operations overlap]
Example: When Mute is activated by the DP-SP3 followed by Mute All activation using the DP-SP3 PC Software.
8.3. Turning OFF the Mute Function by the DP-SP3
Step 1. Confirm that the “−40” level indicator of the output channel wishing to cancel the mute operation is
flashing.
Note
Mute operation of the output channel, of which level indicator is intermittently flashing or lighting, cannot
be cancelled by the DP-SP3.
Step 2. Press the Mute switch of the corresponding channel,
then release it when the “−40” level indicator of that
channel stops flashing, then goes out or lights*.
* The indicator lights if the mute operation with lower priority indication
activated by the DP-SP3 PC Software overlap with the muting operated by
the DP-SP3. Use the DP-SP3 PC Software to cancel the mute.