ThermoWorks 226-270 DATA TEMPERATURE RECORDER - DTR Software Manual - Manual (Page 22)

22
NUMBER OF COPIES TO BE PRINTED USING THE REMOTE BUTTON
To increase or decrease the number of copies to be printed when pressing the
remote button click the '+' or '-' boxes. The boxes are located next to 'Number
of copies to be printed' text in the 'Operation of the probe button' section. The
minimum number is 0 (no copies to be printed, just the original ticket) and the
maximum is 3 (default = 0).
AUTO-OFF
To maximise battery life, the DTR can be set up to switch off automatically
after given period of time when idle. To enable this feature, tick the 'Auto-off'
checkbox in the 'Auto-off' section. To disable 'Auto-off', de-select the checkbox.
The auto-off time can be set from 1 to 30 minutes. The value cannot be changed
when the 'Auto-off' feature is disabled.
TICKET HEADINGS - DTR
The information in the heading fields of the printed ticket can be changed to suit
the user requirements. These can be changed in the 'Ticket headings' section of
the 'Advanced' tab and are shown in the ticket layout on the 'General' tab.