ThermoWorks 226-270 DATA TEMPERATURE RECORDER - DTR Software Manual - Manual (Page 19)

19
overwrite the oldest data in memory but selecting the appropriate option in the
'Data storage' section of the Advanced tab.
TICKET HEADINGS – SUMMARY MODE
The information in the heading fields of the printed ticket can be changed to suit
the user requirements. These can be changed in the 'Ticket headings' section of
the Advanced Tab.
'LOGGING' MODE
In Logging mode the instrument prints at a regular interval selected by the user.
During the initial printing the instrument serial number, a logo and a header
can be printed. Subsequent prints at each timed period contain the date, time,
temperatures and Hi/Lo Alarm status.
A start delay for the log can be set using the plus and minus buttons in the 'Start
delay' section of the 'Advanced' tab. A delay of up to 23 hours, 59 minutes and
59 seconds can be set. Setting 0 hours, 0 minutes and 0 seconds will give an
immediate start when the 'START' button is pressed.
The log interval can be set from 6 seconds to 255 minutes using the drop down
box in the 'Log interval' section of the 'Advanced' tab. The total log duration is
calculated by the software each time the log interval is changed.