ThermoWorks P795 PRINTING DATALOGGER THERMOMETER - Manual (Page 4)

1.4.1 Measuring unit switching °C, °F and Resistance (Ohm’s)
Unit = Measuring unit
Measuring unit temperature (°C=Celsius, F°=Fahrenheit, o=Ohm)
To change the measuring unit push [ENTER/MENUE]. Use the up and down keys
[] to select Unit. Push again [ENTER/MENUE]. On the right corner of the display
appears °C, °F or o. Use the up and down keys [] again to adjust the requested
measuring unit and push [ENTER/MENUE] to confirm. Push [ESC] to be back in the
measuring mode.
MENUE
Unit Lin2 CAL Chnl Log
1.4.2 Temperature difference (only 2-channel instruments) / [Lin2]
To display the temperature difference push [ENTER/MENUE]. Use the up and down
keys [] to select Lin2. Push again [ENTER/MENUE]. On the right corner of the
display appears a T
1
-T
2 .
Use the up and down keys [] to adjust the requested
selection. Push [ENTER/MENUE] to confirm. Push [ESC] to revert back to the
measuring mode.
MENUE
Unit Lin2 CAL Chnl Log
Note: Both channels have to be activated for displaying temperature difference.