TeeJet FieldPilot Install Case MX Magnum - Manual (Page 14)

www.teejet.com
12
FieldPilot ®
7. install load sense shUttle and adaPters
Pre-assemble the load sense shuttle (L) with adapters (P) , (O) , and (M) .
Figure 1-8: Install Load Sense Shuttle and Adapters
Locate the small load sense hydraulic line on the left side of the steering orbital. Disconnect it as shown.
Figure 1-9: Install Load Sense Shuttle and Adapters
Attach the end of the load sense shuttle with the o-ring face adapter to the hose going back to the steering
orbital. Attach the tractor load sense line to the o-ring face female elbow in the center position of the shuttle
as shown.
o
p M
ls
disconnect
here
original hose
going
to the orbital
tractor
load
sense
K