TeeJet FOREST LOGGER - Manual (Page 7)

7
JOB NUMBER
This function controls the metre trip and the metre total counter for 5 registers.
Press the key.
The display may say "No. 1".
The register number can be changed by pressing 1, 2, 3, 4 or 5.
When the monitor is switched on it continues to work in the same register as when it was
turned off.
SPEED CALIBRATION
When the FOREST LOGGER is mounted the speed sensor at prop shaft or wheel must
be calibrated.
The FOREST LOGGER is able to calculate the correct wheel circumference
automatically by driving 100 metres. For this method do as follows:
Press
The encoded value appears.
Press again till the display says „Auto“. Release the key.
Press again. The display says "0".