TeeJet FOREST LOGGER - Manual (Page 6)

6
METER COUNTER, TOTAL
When pressing this function key the total counter shows the driven distance in metres up
to 9999 metres. After this the distance is shown in km with 2 decimals from 10.00 km to
65.53 km. The function goes for the job number in question. Thus the meter counter may
show different values for the various registers.
The metre counter can be stopped by pressing the key.
NB: The meter counter will only be stopped if the function m/min is shown in the
display. If not, press the m/min key twice.
In the m/min function a "r" appears when the metre counter is stopped.
The metre total counter is zeroed by pressing the key for min. 2 seconds.
SPEED METER
When pressing this function key the current speed in metres per minute appears. If speed
exceeds 99 m/min, say for road transport, speed is shown in km/h.
FOREST LOGGER
always shows speed when turned on.
When speed (m/min or km/h) is displayed the meter counter can be stopped and started
by pressing the key.
When the meter counter is stopped a "r" appears left in the display. When the meter
counter is started the „r“ disappears from the display. In stead the number of the current
job register is shown to the left.
For display of km/h (over 99 m/min) the register number is not shown. A "r" is displayed
if the metre counter is off.