TeeJet LH 765 - Manual (Page 15)

LH 765 G RAIN LOSS MONITOR – O PERATORS MANUAL & F ITTING INSTRUCTION
LH A GRO 15
LEADING THE CABLE FROM THE SIEVE SENSOR
Connect the plug to the sensor and fit the cable fasten to the bracket as shown
below. This fastener is important for the life of the cable.
Make a bend in the cable that is large enough to "capture" the movement of the
sieves. Fit another cable fastener on the side of the machine.
Lead the cable hereafter to the junction box. Lead the cable avoiding any sources
that might damage the cable and fasten the cable with the supplied fastener/cable
ties where possible to existing cables, hydraulic pipes, etc.
Connect the wires to the terminals as shown on the junction box PCB.