TeeJet 026 – 73 AddFlow - Manual (Page 4)

3. Functionality
Function Display Comments Possible actions
1. Injection
dose
rate
Inj . r at e
2.00 %
This is the desired dose rate for
the injected product. It is set as
a percentage of the main carrier
flow.
Pro to change dose rate
↑ ↓ to select another display value
2. Injection
flow
inj . f l ow
0.00 l / m
↑ ↓ to select another display value This is the actual flow of injected
product
3. Carrier
flow
car . f l ow
0.00 l / m
This is the actual main carrier
flow
↑ ↓ to select another display value
4. Injected
volume
inj . vol
0.000 l
This is the injected volume
counter
↑ ↓ to select another display value
CLR to clear the counter.
4. Priming
To activate priming, push the Pump switch to CAL
The pump will then start running and the display will show pumped volume.
pr iming
0.000 l
When predefined prime volume has been injected, the display will go back to the previous working
screen.
026-UK V1.01 18/05/2006 Page 4 of 8