TeeJet 744E AUTO BOOM SECTION CONTROL - Manual (Page 4)

2
www.teejet.com
TJ44E
InTRoduCTIon To TJ744E - aBsC
The Matrix is a combined Guidance and Automatic Boom Section Control (ABSC) device
that features control of up to 15 boom sections. The Matrix connects in parallel to the
existing wiring loom to the section valves.
Principle of operation
The Matrix controls the section valves according to the GPS position as well as the GPS
guidance to avoid overlaps or skips.
The Matrix controls the section valves in automatic mode. The section switches should be
set to off unless the operator wants to override the auto mode and thus force spraying.
The Matrix monitors the section switches that control the valves in manual mode. The
master switch can be used both in automatic mode and in manual mode.
Required Parts
To add Automatic Boom Section Control to a TJ744 Sprayer Control kit, the following part
numbers are required:
Item Part Number Description Quantity
A 90-xxxxx* Matrix Guidance Controller Kit ........................................................1
B 198-396 TJ744 ABSC Cable, 5 Section ........................................................1
C 45-05626 Power/CAN/Data Cable, Matrix ......................................................1
*Part number is dependent on kit contents