TeeJet TASC PRINTER MODULE - Manual (Page 8)

8
R1
VER 3.0
999-1521
TROUBLESHOOTING
a. Printer power light will not come on when the printer is turned "ON".
1. Check to be sure the TASC Control Console is turned "ON".
2. Check to be sure the interface cable is plugged in to the Serial I/O Port of the TASC Control Console.
b. The TASC Control Console momentarily displays ERROR Message Err P when the print request switch is
activated. The printer can receive no data from the TASC Control Console because it is busy controlling the
sprayer. Spraying operations must stop before printing is possible.
c. Red border on the paper tape, change the paper roll.
d. Faint printing, change the ribbon cartridge.