TeeJet TASC PRINTER MODULE - Manual (Page 6)

6
R1
VER 3.0
999-1521
f. Pull the paper through the printer, until several inches are exposed. Carefully slide the ribbon cartridge over
the paper and reinsert it into the print compartment.
g. Slide the paper through the slot in the print compartment cover.
h. Push the back of the print compartment cover down and into place.
i. Press the front of the print compartment cover down until it locks into place.
j. Finally, turn the new paper roll to take up any slack in the paper feeding to the printer and lay the roll in the
paper compartment. Replace the clear plastic cover over the paper compartment. Make sure the roll of paper is free to
rotate. If the paper roll is not free to rotate, it may jam and cause damage to the printer mechanism.