TeeJet MATRIX 570VT Software version 1.00 - Manual (Page 15)

13
98-05266 R0 US
Matrix
®
570VT ● ISOBUS
LCD Brightness
Figure 1-19: LCD Brightness
Figure 1-20: Touch Screen Calibration
LCD Brightness adjusts the brightness of the console
display. Range is 0 - 100.
1. Press CONSOLE ICON .
2. Press LCD BRIGHTNESS ICON .
3. Press the UP/DOWN ARROW ICONS to
adjust LED brightness.
• Higher the number, the brighter the LCD
• Lower the number, the dimmer the LCD
4. Press
►PAGE RIGHT ARROW to proceed to VT
Number.
►SYSTEM SETUP TAB to return to main System
Setup screen.
NOTE: Press & hold UP/DOWN ARROW ICONS
to quickly adjust settings.
Virtual Terminal Number
Virtual Terminal Number defines the unique number
for this specific VT terminal. On systems with multiple
VTs, each VT much have a unique VT number. Only
VT number 1 can show the auxiliary input allocation;
therefore, there shall always be a VT number 1. The
remaining VTs can use any number. Range is 1 - 32.
1. Press CONSOLE ICON .
2. Press VT NUMBER ICON .
3. Press the UP/DOWN ARROW ICONS to adjust VT number.
4. Press
►PAGE RIGHT ARROW to proceed to Touch Screen Calibration.
►SYSTEM SETUP TAB to return to main System Setup screen.
NOTE: Press & hold UP/DOWN ARROW ICONS to quickly adjust settings.
WARNING! This number should not be changed from "1" unless there is more than one virtual terminal on the
system.