TechniSat DVB-T/IP IRD - Manual (Page 4)

4
EN
1
Safety advice
For your own safety you should read this first and carefully – please pay attention to the
given advice before you start operating the device.
All assembling and installations have to be carried out by professional staff. Professionals are
persons who have an extended knowledge in the area of Sat Equipment installations and are
also familiar with the safety and emergency standards. In addition they should be familiar
with governmental rules and standards (e.g. DIN) that are applicable for the assembling of
such a device.
For your own protection you are advised to read the safety precautions carefully before
using the set.
The manufacturer will not assume liability for any damages caused by improper handling or
by not following the safety precautions properly.
In the following situations you should unplug the set from the mains power and seek
professional help:
> If the power cable or plug is damaged
> If the set has been subjected to dampness or liquid has entered.
> If there is a serious malfunction
> If it has suffered serious external damage
Special Risk- and Positioning Advice:
Notes on dangers and setting up which need your particular attention:
Mains connection:
> It is only permitted to use an adequate mains socket 0f 230 V as voltage source.
> Position the mains cable so that nobody will trip over it.
Location:
> The ambient temperature must be between 0 and 40 °C.