TechniSat DVB-T/IP IRD - Manual (Page 36)

36
EN
4.5.1.1.2 DVB Mode (MPTS)
In the DVB mode the complete transponder will be played-out via an address. (details see
2.1.2).
For this the following settings in the menu need to be done:
• System > Optional Function > External Board Type = IP Out (see 4.3.6)
• Outputs > Ethernet > Mode = DVB (see 4.5.1)
You are within the main menu,
Section: Outputs.
In case of Multicast-transmission we
suggest using the following range of address:
Set of the Uni/Multicast-Address
(see also RFC5771):
225.x.x.x up to 232.x.x.x
and
234.x.x.x up to 238.x.x.x
In case of Unicast-transmission please insert
the IP-Address of the destination Client.
Please assign a Port-number
Setting the UDP Port
1234 is the default port for UDP/RTP streams.
The destination Mac Address will be only
needed for the Unicast-transmission. Please
insert the Mac Address for the destination
client.
Set the destination Mac Address
ENTER
 
ENTER
 
Output
Ethernet ->
ENTER
ENTER
 

Multicast UDP Port
3000
Main Menu
Outputs ->
Uni/Multicast Setup
->
ENTER
Multicast IP
225.1.1.1
ENTER
ENTER
 

Destination Mac Addr
ff:ff:ff:ff:ff:ff