TechniSat DVB-T/IP IRD - Manual (Page 34)

34
EN
Set the transmission parameter for a channel.
Chose a channel
In case of Multicast-transmission we
suggest using the following range of address:
Set of the Uni/Multicast-Address
(see also RFC5771):
225.x.x.x up to 232.x.x.x
and
234.x.x.x up to 238.x.x.x
In case of Unicast-transmission please insert
the IP-Address of the destination Client.
Please assign a Port-number
Setting the UDP Port
1234 is the default port for UDP/RTP streams
The destination Mac Address will be only
needed for the Unicast-transmission. Please
insert the Mac Address for the destination
client.
Set the destination Mac Address
Switch on-/Switch off the streams
0-Uni/Multicast ID
238.1.1.1
ENTER
ENTER
 

ENTER
ENTER
 
0-Uni/Multicast Port
1234
ENTER
ENTER
 
0-Destination Mac
address
ENTER
ENTER
 
0-Switch
On

Channel x
->
ENTER
ENTER
Channel 0
->


