TC-Helicon VoiceTone Correct - Manual (Page 20)

Advanced Settings: Tuning Reference
If you know that the instruments you are singing with are
not tuned to A440, or you hear that your corrected
voice doesn’t sound in tune, then you need to change
Correct’s tuning reference.
1. Press and hold the Warmth, Shape, and Compress
Buttons simultaneoulsy as you plug the power adapter
into Correct. The Pitch On Light flashes to indicate you
are ready to change the tuning reference.
2. Plug your mic into the Mic Input and set the level as
in Step 8 of the Quick Start section.
3. Place the microphone near an instrument you know
to be in tune (piano, guitar, bass, etc.), and play any
monophonic pitch.
4. On the pitch display you’ll see how far the instrument
is out of tune from A440 on the top bar. As the note is
held, the bottom bar will show the tuning reference
change to correct it. When the two bars match, press
the Left Footswitch. Correct will enter regular mode
with the new tuning reference.
Setup Configurations
20
The tuning reference is reset to A440 the next time
power is removed from Correct.
NOTE: