Quick start, Step 7, Step 8 – TC-Helicon VoiceTone Synth Manual User Manual

Page 9

Text mode
Original mode

Step 7:

While singing through your microphone, raise the Input
Knob until the Input Light turns green, sometimes
orange on louder parts, but never red.

Step 8:

For your first listen, check that the LEDs conform to the
status shown in the boxes below. Press the button
associated with the LEDs to change them if necessary.
Select preset 1 or 2 with the Preset footswitch.

Quick Start

Press so

LED is ON

Press to

light LED