TC-Helicon VoiceTone Synth Manual - Manual (Page 14)

14 14 14 14
3. Lead Mix Knob
Lead Mix controls the mix of the HardTune and Vocoder
effects. 12 o’clock is the default position for any
combination of these effects.Turning the knob right boosts
the effect. When two effects are on, the knob controls the
mix between the two.
4. Rez Knob
Modifies the vocoder effect by controlling the number of
filters or poles applied to the vocoder.This has the effect of
modifying intelligibility in a musically useful way.
5. Modify Knob
This control gives additional sonic flexibility to the
Transducer effects. Each effect has its own assignment of
parameters controlled by the Modify knob.
Note:The Lead Mix, Rez and Modify parameters are
stored with the preset. Changing them only affects the
current preset.
Front Panel
1 2 3 4 5
1.
Input Knob and LED
Adjust the Input Knob so that while you sing, the LED
beside it flashes green, sometimes orange but never red.
2.Tone Button
This engages TC-Helicon’s Live Engineer Effects which
automatically modifies your voice and makes it sound
smoother and brighter. When engaged, these effects
remain active whether the On button is active or not.