4 using speed and distance mode, 1 pairing a pod – SUUNTO T3C User Guide User Manual

Page 26

4 USING SPEED AND DISTANCE MODE

The

SPEED AND DISTANCE

mode becomes available after you have paired a speed and

distance POD with your Suunto heart rate monitor.

4.1 Pairing a POD

To use

SPEED AND DISTANCE

mode, you first need to pair your Suunto heart rate monitor

with a Suunto POD.
To pair a POD:

1. In

TRAINING

mode, enter the menu (

SET

) and scroll with [Lap +] until you reach

PAIR A POD

2. Press [Mode] to get to the first setting and select the POD type using [Lap +] and

[Light -].

3. Press [Mode] to activate pairing.
4. Turn on the POD while message

TURN ON

is displayed.

Use the same procedure to pair you heart rate transmitter belt.

NOTE: Before you (re)pair your POD or belt, you need to first reset the device by removing

the battery and putting it in backwards (positive side down). Then replace the battery
normally.