Citizen Systems Citizen PPU PPU-700 - Manual (Page 30)

— 27 —
4.8 Changing Paper Width
The printer can accept four kinds of paper widths: 82.5 mm, 80 mm, 67 mm,
and 58 mm.
Use the following procedure to set the paper width.
1. Move the paper guide of the paper slot at the back of the printer to meet the
paper width.
2. Command
Paper guide
3. When using the paper holder (PHU-3***), loosen the screws (4 places
including other side) shown in the figure, adjust the holder to the specified
width, and then tighten the screws.
When the paper width is 58 mm or 67 mm, remove the E ring and move the
paper roller located at position (1) in the figure.
(1)
Screw