Citizen Systems Citizen PPU PPU-700 - Manual (Page 27)

— 24 —
4.4.2 Paper Setting by Auto-loading
1. Keep the paper guide closed.
2. Cut the end of the roll paper almost at right angle. (Fig. 4-1)
3. Insert the roll paper from the paper slot till it gets a drag.
4. Paper is detected and automatically fed for a certain time and then paper
initialize operation starts.
5. When paper initialize operation is finished, the printer is ready for operation.
6. When paper feeding fails, extract the paper once and repeat the procedure
from step 3.
CAUTION!
● Always use the specified type of paper roll.
● Use of other type of paper roll may result in a failure in assuring the print quality, head
life, presenter function, etc.
● Paper roll with fluffed or folded end shall not be inserted. Paper jam or wrong insertion
of paper may occur.
● Rewind the paper roll to remove loose winding.
● When the paper roll is set slanted, lift the head up lever and adjust the paper roll
position or remove the paper roll and then place it correctly.
● During auto-loading, do not touch the roll paper by hand. Otherwise irregular paper
feed or paper skew may result.
● Do not lift or hold the roll paper during printing. Otherwise, paper jam may occur.
● After paper setting is completed, the printer is ready for printing. In this case, note
that printing occurs just after paper setting if data remains in the buffer.
Fig. 4-1